Technos Instruments
Sitapura, Jaipur, Rajasthan
GST No. 08AAEFT7528C1Z6
Call 08046077790 6% Response Rate
CMD Sensors
Our range of products include phv led type cmd sensor, lav led type cmd sensor and ph-dx led type cmd sensor.
PHV LED Type CMD Sensor
Rs 1.25 Lakh / PieceGet Best Price
Product Brochure
| Power Source | 100 to 240 V AC |
| Power consumption | 40 mA or Less |
| Light source | Infrared LED(880nm) |
| Detecton distance | 25mmx2 beams |
| Detectable object | Opaque objects with 1mm or more |
| Operating mode | Changeover by control wire |
| Protective circuit | Protection for power reverse connection, Protection for output counter-voltage |
| Response time | 1msec or less |
| Repeatability | 0.1mm |
| Indicators | Power lamp Green |
| Connection | Cable Type |
| Weight | Approx 60 Gm |
Using LED as Light source
This is a new optical fi ber type CMD using LED as light source. This equipment is composed of projector(Sensor head, heat-resistance fiber and amplifi er) and receiver and detects steel material whi ch passes through between them.
- This doesn't specify power source. It is capable of being used within the scope of 100 to 240VAC.
- Water-cool ing or air-purge isn't required fo r sensor head because non- air dust purge hood is appl ied.
- 8-point LED display unable to monitor the margin and emitti ng state.
- Warning output is provided.
View Complete details
get quote
request a call back
LAV LED Type CMD Sensor
Rs 1.5 Lakh / PieceGet Best Price
Product Brochure
| Power source | 240VAC |
| Power consumption | Projector: 5VA or less, Receiver: 5.5VA or less |
| Safety standard | Class 1(JIS C6802) |
| Detecting distance | 50 m |
| Detectable object | Steel material with 100 or more(FHM-311) |
| Response time | 30 Sec Or Less |
| Operating mode | Changeover of DARK-ON/LIGHT-ON |
| Control output | 1C relay contact |
| Analog output | DC voltage output in proportion to light-reception amount(Saturated value 9V or more but do not use |
| Connection | Connector type(Cable 2m) |
| Fiber unit characteristics | Allowable bending radius: 100mm, Max. pressure: 784MPa, Tension strength: 490N |
| Ambient illuminance | 10,000lux or less |
| Ambient humidity | 45 to 85%RH(Not icing) |
LAV-10/LAV-11
This is a new optical fi ber type CMD using semi-conductor laser as light source. This equipment is composed of transmitte r(Sensor head, heat-resistance fi ber and amplifier) and receiver and detects steel material which passes through between them. It emits more powerfu lly compared with LED type so that high perfo rmance with margin in bad environment is possible.
- It is capable of being used within the scope of 100 to 240VAC.
- Water-cool ing or air-purge isn't required fo r sensor head because non- air dust purge hood is appl ied.
- 8-point LED display unable to monitor the margin and emitti ng state.
- Warning output is provided.
Optical axis adjustment
- Optical axis adjuster, TES-110 is also available as an option.(Ask us in details) This is using red laser element(Class 2) and it is easy to adjust optical axis visually
View Complete details
get quote
request a call back
PH-DX LED Type CMD Sensor
Rs 1.25 Lakh / PieceGet Best Price
Product Brochure
| Power Source | 12 to 240VDC or 24 to 240VAC |
| Power consumption | AC power: Projector 0.5VA or less,Receiver: 3VA or less DC power: Projector 0.5W or less,Receiver: |
| Detecting distance | 30m or less(Without slit for both projector and receiver) |
| Detectable objects | Opaque object with 30 mm or more |
| Response time | 10msec or less |
| Operating mode | Changeover for Light-ON and Dark-ON |
| Sensitivity adjuster | Provided |
| Connection | M3 screw terminal |
| Ambient illuminance | 10,000 lux or less |
| Weight | Approx. 1.5 kg for both projector and receiver |
| Protective structure | IP 66 |
Free voltage, 12 to 240VDC and 24 to 240VAC
- Light-reception amount can be display with 5-point level lamp and so it is easy to check light-reception margin or dirty lens surface and dislocation of optical axis.
- Self-diagnosis function that checks light-reception margin provides with projector. This output is executed.
- Output will be made when level of light-reception amount is lower than specific value caused by dirty lens surface or dislocation of optical axis.
View Complete details
get quote
request a call back
EXPLORE MORE CATEGORIES