Technos Instruments

Other Details:
KAD-200/300
Easy to set optional distance
This equipment is composed of the amplifier unit and the reflector. It detects whe n crane or AGV etc. is close. It measures the distance between the unit and the refl ector with phase and executes output. Trouble output(FAULT) executes when light-emitti ng amount or light-receiving amount is getti ng lower or troubled.

• Speed-down and stop of crane etc. can be controlled by 2-step output.(3-step for KAD-300)
• It is easy to set optional detecting distance by pushing the button for distance setting.
• It always makes a self-diagnosis with inner circuit and it prevent the troubles beforehand.
• It outputs the distance data(???R mode) with analog value(0 to 10V) and it outputs light-receiving amount(???T mode) with analog value. mode) with analog value.
• It is easy to make an optical axis with 5-point level meter.

Other Details:
MBX-211
Geometry setting system is applied and detecting precision is high!
This is a microwave overhead traveling close crane warning device. Consisting of two sets of transmitte r/receiver installed oppositely, when two cranes appr oach each other until the both detecting areas overlap, the microwave of the oppo site side is mutually detected, and an alarm signal is executed.

• This device provides excellent detecting accu racy and axis is not dislocated by vibration because of geometrical setti ng system utilizing the directivity of horn antenna.
• Malfunc tion doesn't cause by leakage signal from opposite channel or reflective wave from buildings because of synchronous setti ng of power fr equency. 
• Monitor output which can check both transmission and reception of microwave provides.
• This device can get output in series from detecting distance to crane contacting point without interlocking circuit by adjusting installing angle.
• This device can be used outdoor because characteristic of microwave isn't be affe cted by direct light, wind or rain etc.