Technos Instruments

Other Details :
IR measurement is done by Grazing Angle Objective (GAO), by studying the spectra obtained by focussing it on the area we want to measure like Diamond ATR objective. Measurement of thin layer can also be done without too much difficulty, which is one of the difficult type of sample to measure. Thus your FTIR microscopy could be the very strong analytical tool once you equipped this GAO.
Feature :
Earlier it was very difficult to see the sample at grazing angle and this new GAO has solved this problem with the LED. This GAO equipped with the same latest LED with microfiber, which we have used for Diamond ATR objective. Using this we can measure the spot without any difficulty.

Other Details:
Errorless IR measurement can be done by studying the spectra obtained from New and Ultimate Diamond ATR objective, by focusing objective on the area we want to measure. With Diamond ATR objective equipped in FTIR microscope, will give magnification of 72X. Even a good quality of spectra can be obtained from area Less than 20 Mum using this objective. It has unique design and mechanism to make IR beam matched with visible light. Moreover, samples which has not been able to be observed clearly in reflectance mode in visible light because of the reasons like contamination on the metal surface, but now it can be observed clearly with this new Diamond ATR Objective.
Features :
Magnification of this ATR objective is approx. 5 times bigger than conventional ATR objectives with visible resolution less than 10 Mum which is significantly high compare to other ATR objectives.
The measurement with ATR objective becomes difficult if the visible image is not clear, and it happens when the visible light can''''t pass through it and It happens when the sample is kept on the metal surface. But using the latest LED with microfiber, it is possible to put the internal illuminator with success and this problem has been solved finally. 

Other Details:
Diamond ATR Slide Plate for iN10D-SlidIR is diamond ATR slide plate for infrared microscope of iN10, developed for measurement of various samples. The slide plate is scratch less and is unbreakable compared to Germanium. Thus it can be used to measure the hard materials without any fail. SlidIR surface is made spherical to make it easy contact with various samples. The stage can be moved keeping the sample contact with the diamond. Moreover it is very easy to install in microscope. 2.1.
Features:
"D-SlidIR" uses diamond as ATR element which makes it scratch less and unbreakable.
Refractive index is 2.35 (Diamond) which enables it to measure deep surface than Germanium ATR.
It also includes mask, which can change the angle of incident.

• Precise temperature control up to 600 degree C.
• Easy sample loading, assembly and disassembly.
• Direct transmission measurements in sample compartments of FTIR spectrometers which includes variety of windows such as Kbr, BaF2, CaF2, Quartz and ZnSe.
• S100R also provided with three sample holders.

• The sample compartment of Model S100R is sealed structure by O-ring and making the measurement condition under the vacuum.

• S100 has two gas ports of 1/8 inch Swagelok. 

• Stage can use under 0.5MPa pressure with pressure resistance windows such as BaF2, CaF2, ZnSe etc.

• An optional interface plate for motorized stage of FTIR and Raman microscope is available. Also, the S100R may be used inside the FT-IR sample compartment as a heated transmission cell.

• Sample can be changed very easily. The upper window plate uses a twist-on design; no tools are required. (But screws need for under pressure).

• The sample may be placed on a 13mm diameter window or on the provided 13mm alignment mirror. A variety of windows are available including KBr, BaF2, CaF2, Quartz, and ZnSe. S100R also provide the three sample holders. Each holders has hole of 1, 2 and 3mm. It is very useful for Transmission measurement.

• S100R is made of Aluminum and very thin profile (16mm). It can use for short working distance objective of microscope.

• For minimize the transfer of external heat, S100R has water-cooling circuit in main body.